Ultra-Low 510 Battery — Quick Start & Settings

Quick start (1 minute)

1. Charge first — Use a standard 5V charger. Charge no more than ~2 hours at a time. Don’t use high-watt laptop/PD bricks.

2. Attach your cartridge — Screw on snugly (don’t overtighten).

3. Power — Press the button 5× to turn on/off.

4. Set temperature — Press 3× to cycle voltages. Start low; increase if needed.

Recommended settings

• 2.0 V (Yellow): Live Resin+Rosin Sauce

• 2.6 V (Blue): High CBD

• 3.2 V (Green): High THC

Tip: This battery shines at low temps. If clouds feel thin, take a slower draw before bumping voltage.

Charging & care

• Use 5V charging only; avoid extended unattended charging. Do not exceed ~2 hours.

• Keep away from heat and direct sun; store upright when possible.

• Wipe battery and cart contacts with a dry swab if performance drops.

Quick fixes

• No hit: Confirm power is on → try a different cart → clean contacts → recharge.

• Burnt/harsh: Lower voltage; take lighter draws.

• Blinking light: Often low battery or short contact—recharge and re-seat the cart.

Specs & compatibility

• 510-thread; variable-voltage.